Electrical Control Copper Wire Bunching Machine Touch Screen
Interface Operation
Copper Wire Bunching Machine Merits:
1. Spindle and aluminum plate finish: after high-speed dynamic
balancer processing; noise less than 75 decibels
2. Electrical control: user-friendly touch screen interface
operation, control by the PLC programmer + inverter
3. Bow use Japan imported SK5, finished with heat treatment, the
surface of hard chrome
4. Transmission system: drive with synchronous belts , laying
accurate, no internal lubrication position, no waste products
effect by refueling and machine cleaning
5. Change the lay length: easy to operate, just change the leading
wheel according to the lay length sheet
6. Pressing device: equipped with two pressing devices to ensure
the roundness of the conductor after twisting, to protect the
product characteristics of thin-walled insulation line, effectively
reduce the wear and tear of insulating materials.
7. Meter counting way: the latest domestic design, with spindle
meters; the same machine twisted with a conductor specifications,
meter error in one ten thousandth
Copper Wire Bunching Machine main performance parameters
1. Application: over 7 pcs alloy wires, tinned wire, enameled wire
and etc. 1 + 6 can replace twisting with stranding
2. Mono-filament diameter range: φ0.025 ~ φ0.08mm
3. Twisted wire diameter range: φ0.075~ φ0.24mm
4. Stranded cross-sectional area: 0.0034~ 0.035mm²
5. Spool specifications: φ200mm ×31mm×φ135mm(or customerized with
client’s drawings)
6. Max speed : 3000RPM(Design speed);
7. Cable laying: φ15mm light rod bearing type ,rolling lay length
and distance can be accurately adjusted
8. Strand lay length: 0.8~ 4.0mm 14 class
9. Main motor: 2.2KW AC motor
10. Assembly volume: about 10Kg
11. Twisted direction: left and right direction can be arbitrarily
selected, pull the switch bar to change the direction,easy
operation
12. Brake: With electromagnetic brakes, can achieve automatic
braking when internal /external disconnection, and meet setting
meters
13. Tension control: magnetic clutch control thread tension, by the
PLC program controller automatically adjust the tension, keep the
tension constant
14. Machine drive bearings: main shaft with Sweden SKF bearings ,
the others are Japan NSK bearings
15. Timing belt: import from US
16. Spool loading/unloading : Manual up and down the line, no lift.
17. Spindle lubrication: butter lubrication
18. Noise index: less than 75dB
19. Machine size (mm): 2000L × 960W × 1100H
20. Weight: 1200 Kg
Copper Wire Bunching Machine Mechanical Performance
1. Body structure:
1) Material: low carbon steel welded together.
2) Structure: the body by annealing and aging, to eliminate
internal stress, and then boring by a precision boring machine to
forming a molding.
2. Bunching Entry part:
1) Bunching Entry position: facing to the front door, at the right
side of the machine (can be customization according to customer
requirements to change to the left side).
2) Bunching Entry Mode : from the pay-off device through the
disconnection sensing area, first to the total sub-line board
(sub-hole by 1 +6 +12 + ... distribution), through first pressure
mold, then the second Pressure mold, after entering the right
spindle within the wire guide wheel. From the aluminum arch with
porcelain ring and then into the left spindle within the wire guide
wheel, and then through the center corner’s guide wheel to the
leading wheel, Final to the aligner’s guide wheel to cable laying
(see wire bunching entry pattern diagram)
3. Spindle:
1) Material: 40Cr steel forging after quenching and tempering
treatment.
2) Accuracy: The shaft core outer face diameter and the bearing end
face are ground to ensure concentricity and verticality with the
axis.
3) Dynamic balance: Standard of G2.5 (0.03 grams of weight
difference)
4. Aluminum plate:
1) Material: ZL104
2) Accuracy: All end faces are positioned relative to the locating
holes(less than 0.03 grams)
3) Dynamic balance: Accuracy of G2.5 (0.03 grams of weight
difference)
5. Bow
1) Material: Japan imported SK5.
2) Shape: special appearance, reduce the wind resistance.
3) Weight tolerance : less than 0.03 grams per pair
6. Transmission part: with imported synchronous belt drive, laying
length accurate
7. Wire entry wheel:
1) Material: # 45 steel finished with heat treatment HRC30-40.
2) Hard chrome plated on the surface, not easy to wear
8. Spindle housing:
1) Material: ductile iron QT42-10.
2) Processing: CNC machine tooling
3) Accuracy: one processing hole end molding, to ensure
concentricity.
